UM0225 datasheet(21/57 Pages) STMICROELECTRONICS

Nome de Peças	UM0225

Descrição Electrónicos	Configuration and programming software

PDF	57 Pages

Scroll/Zoom	100%

Fabricante Electrônico	STMICROELECTRONICS [STMicroelectronics]

Página de início	http://www.st.com

Logo

21 / 57 page

Obsolete

Product(s)

- Obsolete

Product(s)

Obsolete

Product(s)

- Obsolete

Product(s)

UM0225

3 Designing with CAPS

20/56

Selecting the Main Oscillator input clock - 4 to 25 MHz external crystal, requires you to enter

the external crystal frequency, as shown in Figure 12.: Main oscillator clocks selection, step 1.

Figure 12. Main oscillator clocks selection, step 1

The frequency must be in the range from 4 to 25 MHz.

Note:

If the STR91x provides clock to the external Ethernet PHY interface device, the frequency must

be 25 MHz. Otherwise, a separate clock is needed for the PHY.

The PLL can be used to generate the desired master clock frequency used by the CPU and

various peripherals.

Note: 1 The maximum master clock output is 96 MHz.

2 When using USB, the master clock frequency should be either 48 MHz or 96 MHz, unless an

external USB clock is provided.

Selecting the PLL clock, requires you to enter the external crystal frequency and the PLL

frequency, as shown in Figure 13.: PLL clocks selection, step 1.

UM0225 Folha de dados(PDF) 21 Page - STMicroelectronics