| Os motores de busca de Datasheet de Componentes eletrônicos |
|
AN3208 Folha de dados(PDF) 7 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
AN3208 Folha de dados(HTML) 7 Page - STMicroelectronics |
|
7 / 19 page ![]() AN3208 Types of stepper motor Doc ID 17411 Rev 1 7/19 2.2 Permanent magnet (PM) motor This motor is known as a tin-can or can-stock motor. The permanent magnet stepper motor is a low cost and low resolution type motor with a typical step angle of 7.5 ° to 15 °. PM motors use permanent magnets and the rotor does not have the teeth of the VR motor. The PM motor has improved torque characteristics compared with the VR motor. Figure 4. Permanent magnet motor 2.3 Hybrid synchronous motor The hybrid stepper motor contains features of both the PM and VR motors. Hybrid motors are more expensive than PM stepper motors but provide better performance regarding step resolution, torque and speed. Typical step angles for the hybrid motor range from 3.6 ° to 0.9 °.The rotor is multi-toothed like the VR motor and contains an axially magnetized concentric magnet around its shaft. The teeth on the rotor provide an even better path which helps guide the magnetic flux to preferred locations in the air gap. This further increases the detent, holding, and dynamic torque characteristics of the motor compared with both VR and PM motors. Figure 5. Hybrid synchronous motor |
|
|
Ligação URL |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |