3/21

USING THE ST7 USB DEVICE FIRMWARE UPGRADE DEVELOPMENT KIT (DFU-DK)

2 LIST OF INSTALLED FILES

This section provides a list of all the DFU-DK files referred to in this application note.

2.1 DEVELOPMENT MODULES FOR BUILDING YOUR OWN PC SOFTWARE

In the Dev subdirectory, you will find the following items :

– Bin subdirectory

-ST7DFU.dll : interface dll

-STTubeDevice203.dll : driver dll used by the ST7DFU dll

– Inc subdirectory

-ST7DFU.h : C header containining all prototypes exported by ST7DFU.dll

-USB100.h : Microsoft header for USB.

– Lib subdirectory

-ST7DFU.lib : static lib file

2.2 DOCUMENTATION

In the Doc subdirectory, you will find the following items :

– Application note AN1603: this file.

2.3 DFU DRIVER

In the Driver subdirectory, you will find the following items :

– STDFU.inf: installation file for the DFU driver that can be customised to meet the require-

ments of your application

– STTub203.sys: STMicroelectronics tube driver used as a DFU class driver

2.4 EXAMPLE VENDOR UPGRADE SOFTWARE FILES

In the Sources subdirectory, you will find the following items :

– Binary subdirectory inludes binary modules: debug and release

– DFUDEMO subdirectory includes GUI sources

– ST7DFUPRT subdirectory includes DFU protocol dll sources