Os motores de busca de Datasheet de Componentes eletrônicos
  Portuguese  ▼
ALLDATASHEETPT.COM

X  

AN4355 Folha de dados(PDF) 6 Page - STMicroelectronics

Nome de Peças AN4355
Descrição Electrónicos  The L6480 and L6482 devices are motor controllers providing
PDF  25 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Fabricante Electrônico  STMICROELECTRONICS [STMicroelectronics]
Página de início  http://www.st.com
Logo STMICROELECTRONICS - STMicroelectronics

AN4355 Folha de dados(HTML) 6 Page - STMicroelectronics

Back Button AN4355 Datasheet HTML 2Page - STMicroelectronics AN4355 Datasheet HTML 3Page - STMicroelectronics AN4355 Datasheet HTML 4Page - STMicroelectronics AN4355 Datasheet HTML 5Page - STMicroelectronics AN4355 Datasheet HTML 6Page - STMicroelectronics AN4355 Datasheet HTML 7Page - STMicroelectronics AN4355 Datasheet HTML 8Page - STMicroelectronics AN4355 Datasheet HTML 9Page - STMicroelectronics AN4355 Datasheet HTML 10Page - STMicroelectronics Next Button
Zoom Inzoom in Zoom Outzoom out
 6 / 25 page
background image
Motion engine control
AN4355
6/25
DocID025240 Rev 2
2
Motion engine control
The L648x devices integrate a motion engine providing a full set of commands. The motion
engine generates the step sequence according to the programmed speed profile and the
requested command.
The speed profile represents the operation boundaries, defined by the acceleration,
deceleration, maximum and minimum speed, which should be respected to ensure the
proper functioning of the application.
The devices allow all the parameters to be set independently:
Acceleration and deceleration values range from 14.55 up to 59590 steps/s2. The
device can also be set to use an infinite acceleration and deceleration value; in this
case, both the acceleration and deceleration phases are totally skipped.
Maximum speed value ranges from 15.25 steps/s up to 15610 step/s.
Minimum speed value ranges from 0 up to 976 steps/s.
The acceleration, deceleration and minimum speed parameters can be modified when the
motor is stopped only. The maximum speed can be also changed when the motor is
running, but the new value is only considered at next command execution.
The commands supported by the motion engine are listed in Table 1.
Table 1. Command list
Name
Length
(bytes)
Description
Notes
Move
4 (including 3
of arguments)
Performing the target number of microsteps
as per requested direction.
Can be executed when the motor is
stopped only.
GoTo
4 (including 3
of arguments)
Reaching the absolute target position
(ABS_POS register) using the shortest path.
Not accepted while another command
is under execution.
GoTo_DIR
4 (including 3
of arguments)
Reaching the absolute target position
(ABS_POS register) running as per requested
direction.
Not accepted while another command
is under execution.
GoHome
1
Reaching the home position (all zeroes) using
the shortest path.
Not accepted while another command
is under execution.
GoMark
1
Reaching the position stored into the MARK
register using the shortest path.
Not accepted while another command
is under execution.
Run
4 (including 3
of arguments)
Reaching the target speed in the requested
direction.
Always accepted and immediately
executed (if present, the previous
command is aborted)
StepClock
1
Switching the device in step-clock mode
imposing the direction.
Can be executed when the motor is
stopped only.
GoUntil
4 (including 3
of arguments)
Reaching the speed target in the requested
direction and stopping when SW input is
forced low (falling edge).
Always accepted and immediately
executed (if present, the previous
command is aborted)
ReleaseSW
1
Running the motor at low speed in the
requested direction and stopping when SW
input is forced high (rising edge).
Always accepted and immediately
executed (if present, the previous
command is aborted)



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25


Folha de dados Download

Go To PDF Page


Ligação URL



ALLDATASHEET é útil para você?  [ DONATE ] 

Sobre Alldatasheet   |   Publicidade   |   Contato conosco   |   Privacy Policy   |   Link para a ficha técnica    |   roca de Link   |   Lista de Fabricantes
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com