Flow

Direction

Installation information

The flow switch must be mounted vertically with the flow

direction upwards. Pipe connection is G1” (1”BSP). The

device relies on the flow of liquid working in opposition to

gravity to operate the switch.

The liquid flow moves a plunger inside the brass flow tube,

when the flow increases beyond the minimum specified level.

A magnet inside the plunger opens a magnetic switch in the

control circuit to the PLC.

The output will close, if the flow drops below the specified

level and the plunger has returned to the lower position

The output switch will open if the test button is pushed.

The output is a SPNC (when there is no flow) switch with

contacts rated to 1mA/5Vac.

FSVPLC

www.cynergy3.com

© 2012 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.

ISO

Cynergy3 Components Ltd.

7 Cobham Road

Ferndown Industrial Estate

Wimborne, Dorset BH21 7PE

Telephone +44 (0) 1202 897969

Email:sales@cynergy3.com

Inline Flow Switch for connection to PLC