80296SA datasheet(32/40 Pages) INTEL

32 / 40 page

PRELIMINARY

80296SA COMMERCIAL CHMOS 16-BIT MICROCONTROLLER

6.2.4.3

80296SA Deferred Bus Timing Mode

The deferred bus cycle mode is designed to reduce bus contention when using the 80296SA in demultiplexed

mode with slow memory devices. Unlike the 8XC196NU, in which this bus mode has to be enabled through

the CCR to take advantage of the feature, the 80296SA automatically invokes this mode whenever the

appropriate conditions occur. In the deferred mode, a delay of the WR# signal and the next bus cycle will

occur in the first bus cycle following a chip-select change and in the first write cycle following a read cycle.

This mode will work in parallel with wait states. Refer to Figure 11 to determine which control signals are

affected.

Cycle 1 is a normal 4t read cycle. Cycle 2 is a write cycle that follows a read cycle, so a 2t delay of the next

bus cycle is inserted. Notice that the chip-select change at the beginning of cycle 2 did not cause a double

delay (4t). The chip-select change in cycle 3, a read cycle, causes a 2t delay.

Figure 10. Deferred Bus Mode Timing Diagram

CLKOUT

ALE

RD#

A3247-02

TWHLH + 2t

TRHLH + 2t

TAVRL + 2t

TAVWL + 2t

AD15:0

(read)

WR#

AD15:0

(write)

BHE#, INST

A19:0

TAVDV + 2t

TLHLH + 2t

Data In

Data Out

Valid

Data Out

Address Out

Data Out

80296SA Folha de dados(PDF) 32 Page - Intel Corporation