P2CF-08 datasheet(16/23 Pages) OMRON

16 / 23 page

E2C/E2C-H

● Mounting

Mounting the Amplifier Unit

E2C-JC4A, E2C-JC4

Lengthwise Mounting

(1)Secure the Mounting Bracket with the enclosed M3 screws.

(2)Slide the protrusion on the Amplifier Unit into the holes on the

Mounting Bracket.

(3)Secure the Amplifier Unit with mounting screws.

(4)Secure the cover to the case.

Mounting to the Side

(1)Remove the cover screw and mounting screw.

(2)Attached the enclosed M3 screw to the cover and secure the cover

to the case.

(3)Secure the Amplifier Unit with M3 screws from the side.

E2C-WH4A

Mounting Method

(1)Mount to DIN Track as shown in the following diagram.

(2)Hook part (A) at the top of the Amplifier Unit on the DIN Track first

and then press in on the Amplifier Unit in the direction indicated by

(B).

Removing the Amplifier Unit

(3)Pull down on the track stopper (C) with a flat-blade screwdriver and

then remove the Amplifier Unit from the DIN Track. When using

DIN standard 35 track, keep other devices on the track separated

from the Amplifier Unit by at least 30 mm to facilitate mounting and

removal.

Mounting

base

Mounting

screw

M3 screw

Mounting

Bracket

M3 screws

M3 screw

Mounting screw

Cover screw

Mounting base

N 'T TOU

After completing adjustments, attach the

enclosed caution label over the adjustment

holes to prevent adjustment mistakes.

(B)

(A)

DIN Standard 35 Track

(PFP-100N or PFP-100N2)

(C)

30 mm min.

Track stopper

(white)

P2CF-08 Folha de dados(PDF) 16 Page - Omron Electronics LLC

P2CF-08 Folha de dados(HTML) 16 Page - Omron Electronics LLC

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Folha de dados Download

Ligação URL