www.sena.com

OEM Bluetooth-Serial Module,

ESD1000

ESD1000-00

Optional Accessories

- SAT-G01R : 1 dBi Stub Antenna - RP-SMA Plug Right-hand Thread

- DAT-G01R : 3 dBi Dipole Antenna - RP-SMA Plug Right-hand Thread

- DAT5-G01R : 5 dBi Dipole Antenna - RP-SMA Plug Right-hand Thread

- PAT-G01R : 9dBi Patch Antenna with RP-SMA Plug Right hand Thread Default Cable.

(SMA Jack Right hand Thread w/o Default Cable)

- SEC-G01R : 15cm Extension Cable(For SAT-G01R / DAT-G01R / DAT5-G01R)

- RFC-G01R : 1m Extension Cable(For PAT-G01R)

ESD1000SK Parani-ESD1000 Starter Kit

Includes

- Parani-ESD1000 Module

- Jig board

- DC Power Adapter

- Serial data cable

- Quick Start Guide

- SAT-G01R : 1 dBi Stub Antenna - RP-SMA Plug Right-hand Thread

- CD-ROM

Ordering Information

U.S. / Canada / South America

Tel : +1 (408) 573-7425 Fax : +1 (408) 907-3738

Toll Free (US/Canada): 1-8668-US-SENA (1-866-887-7362)

EU / Africa

Tel : +33 (0) 1 53 53 16 29 Fax : +33 (0) 1 70 24 70 90

Asia / Pacific

Tel : +82-2-571-8283 Fax : +82-2-573-7710

Contact us via E-mail

General Information : info@sena.com

Sales & Distribution : sales@sena.com

Technical Support : support@sena.com

Specifications

Serial Interface

- UART

- 2mm Header 14 x 2

- Serial UART speed up to 921.6kbps

- CTS/RTS flow control, DTR/DSR for loop-back & full transfer

Bluetooth Interface

- Bluetooth v2.0 + EDR

- Class 1

- Profiles : SPP

- Working distance(in open field)

SAT-G01R

- SAT-G01R

100 meters

SAT-G01R

- DAT-G01R

150 meters

DAT-G01R

- DAT-G01R

200 meters

DAT-G01R

- DAT5-G01R 300 meters

DAT-G01R

- PAT-G01R

500 meters

DAT5-G01R - DAT5-G01R 400 meters

DAT5-G01R - PAT-G01R

600 meters

PAT-G01R

- PAT-G01R

1,000 meters

[Antennas]

SAT-G01R : +1dBi Stub Antenna

DAT-G01R : +3dBi Dipole Antenna

DAT5-G01R : +5dBi Dipole Antenna

PAT-G01R : +9dBi Patch Antenna

Antenna gain

- Stub : +1dBi, Dipole : +3dBi, Dipole : +5dBi, Patch : +9dBi

Configuration

- ParaniWin, ParaniWizard, ParaniUpdater

- Modem AT command set

Diagnostic LED

- TXD, RXD, RTS, CTS, DTR, DSR, DCD on Jig board

Power

- 3.3VDC

- Minimum : 10mA, Maximum : 60mA

Environmental

- Operating temperature : -30˚C to 80˚C

- Storage temperature : -40˚C to 85˚C

- Humidity : 90% Non-condensing

Physical properties

- Dimension(L x W x H) :

49 x 23 x 11(mm)

1.93 x 0.9 x 0.43( in.)

- Weight : 6g

MTBF: 400.89 Years

Regulatory Approvals

- FCC Part 15 Subpart C Section 15.247

- EN 60950-1 : 2001

- ETSI EN 300 328

- ETSI EN 301 489-1

- ETSI EN 301 489-17

- MIC(Type Registration)

- TELEC(Type Certification)

- SIG

Parani-ESD1000 Starter Kit

The Parani-ESD1000 Starter Kit includes the evaluation board with

the sample circuitry for Parani-ESD1000 interface, power, RS232

interface, H/W Reset, LEDs for users’ device development.

LED(SERIAL)

BT_MODE

H/W RESET

RS232

POWER

Reserved

Reserved

ESD1000

(INTERFACE)

SERIAL

ON/OFF SWITCH

POWER

SWITCH

LED

(POWER)

Reserved

Reserved

Reserved

Reserved

FACTORY

RESET