Life Support Applications

These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected

to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL

for all damages resulting from such improper use or sale.

PS8701

RECOMMENDED SOLDERING CONDITIONS

(1) Infrared reflow soldering

•

Peak reflow temperature

235 ˚C (package surface temperature)

•

Time of temperature higher than 210 ˚C

30 seconds or less

•

Number of reflows

Three

•

Flux

Rosin flux containing small amount of chlorine (The flux

with a max. chlorine content of 0.2 Wt % is recommended

(2) Dip soldering

•

Temperature

260 ˚C or below (molten solder temperature)

•

Time

10 seconds or less

•

Number of times

One

•

Flux

Rosin flux containing small amount of chlorine (The flux

with a max. chlorine content of 0.2 Wt % is recommended.)

Time (s)

120 to 160 ˚C

60 to 90 s

(preheating)

(heating)

to 10 s

to 30 s

235 ˚C (peak temperature)

210 ˚C

Caution: Please avoid removing the residual flux by water after the first reflow process.

Peak temperature 235˚ C or below

EXCLUSIVE NORTH AMERICAN AGENT FOR NEC RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS

CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279

Internet: http://WWW.CEL.COM

10/10/2001

DATA SUBJECT TO CHANGE WITHOUT NOTICE