On-chip Debuggers Performance Property

MINICUBE2

◆As for debugging function information of other emulators, visit each product's page from the following URL.

http://www.renesas.com/emulator_lineups

■MINICUBE2 Debugging Function

Family

Series/ Core

Group

Hardware Break

Software

Break

Forcible break

2 points *1

(Shared by an execution and access)

ROM area:

4 points

RAM area:

2000 points

Supported *2

Before-execution break : 4 points

Access break :

4 points

* Sequential breaks are specifiable.

ROM area:

8 points

RAM area:

2000 points

Supported

1 point

(Shared by an execution and access)

2000 points

Supported

Pseudo-Real RAM Monitor

(RRM) : Supported

Supported

Measurement resolution:

100μs

Max. measurement time:

Approx. 100 hours

Before-execution break : 1 point

(Not supported when software breaks are used)

Access break :

1 point

2000 points

Supported

Pseudo-Real RAM Monitor

(RRM) : Supported

Supported

Measurement resolution:

100μs

Max. measurement time:

Approx. 100 hours

Not supported

2000 points

Supported

(Not supported while

interrupts are inhibited )

Not supported

Not supported

Measurement resolution:

100μs

Max. measurement time:

Approx. 100 hours

* The information provided only applies to MCUs where we have been able to confirm the specifications of the

emulator.

This includes MCUs and emulator software that are under development. For more information on support for these

items as it becomes available, check our website at:

http://www.renesas.com/cubesuite+ ＞ "Functions Supported by CubeSuite+"(PDF)

78K0R

78K0

78K0S

Notes:

*1. The following MCUs have not been supported yet: V850ES/KE2, V850ES/KF2, V850ES/KG2, μPD70F3733, and V850ES/IE2.

*2. A forcible break is not possible in the following states.

- Interrupts are inhibited (DI).

- Interrupts from the serial interface used for communications between MINICUBE2 and the target device are masked.

- The device is on standby and triggering of release from standby by makeable interrupts is disabled.

- The main clock is stopped while the UART is being used as the communications interface between MINICUBE2

and the target device.

V850E2M

V850E2S

Target MCU

V850

V850E1

V850ES

V850E2

DMM

(Rewriting memories

during RUN)

Time Measurement

(from the start of execution

to break）

Break Function

Measurement resolution:

100μs

Max. measurement time:

Approx. 100 hours

Supported

Supported

RAM Monitor

On-chip Debuggers Performance Property - page 3

★ New product ★★ Under development ☆ In planning

Renesas general tools catalog (Sep 2013)