1.2 inches

J2

J1

20

19

1

2

20

19

1

2

SWRU326-007

www.ti.com

Hardware Setup

2.4

Hardware Setup

Before conducting performance tests, the EM board must be connected to the host platform, either with

the mating connectors (J6 and J7) or the single-row headers (J4 and J5). To use the EM mating

connectors to connect the hardware, the mating EM connector must be lined up and spaced 1.2 inches

apart (see Figure 2-7). To use the single-row headers, the required signals from the EM mating

connectors must be wired to the host platform.

Figure 2-7. Host PCB Mating Connector Arrangement

13

SWRU326 – November 2012

CC3000 EM Board

Submit Documentation Feedback

Copyright © 2012, Texas Instruments Incorporated