HPR1XX REV K 8/01

Page 1

FEATURES

-25°C to +85°C

The HPR1XX Series uses advanced circuit design and packag-

ing technology to deliver superior reliability and performance.

A 170kHz push-pull oscillator is used in the input stage. Beat-

frequency oscillation problems are reduced when using the

HPR1XX Series with high frequency isolation amplifiers.

Reduced parts count and high efficiency add to the reliability of

the HPR1XX Series. The high efficiency of the HPR1XX Series

means less internal power dissipation, as low as 190mW. With

reduced heat dissipation the HPR1XX Series can operate at

higher temperatures with no degradation. In addition, the high

efficiency of the HPR1XX Series means the series is able to offer

down to no load will not impact the reliability of the series,

although a >1mA minimum load is needed to realize published

specifications.

The HPR1XX Series provides the user a low cost converter

without sacrificing reliability. The use of surface mounted

devices and advanced manufacturing technologies make it pos-

sible to offer premium performance and low cost.

Absolute Maximum Ratings

Internal Power Dissipation .......................................... 450mW

ShortCircuitDuration .................................................. Momentary

Lead Temperature (soldering, 10 seconds max ........... .+300°C *

* NOTE: Refer to Reflow Profile for SMD Models.

Ordering Information

HPR

1XX

V/W

Device Family

HPR Indicates DC/DC Converter

Model Number

Selected from Table of Electrical Characteristics

Package Option

There is "no" package designator for the SIP package

V = DIP Package

W = SMD Package

Any data, prices, descriptions or specifications presented herein are subject to revision by C&D Technologies, Inc. without notice. While such information is believed to

be accurate as indicated herein, C&D Technologies, Inc. makes no warranty and hereby disclaims all warranties, express or implied, with regard to the accuracy or

completeness of such information. Further, because the product(s) featured herein may be used under conditions beyond its control, C&D Technologies, Inc. hereby

disclaims all warranties, either express or implied, concerning the fitness or suitability of such product(s) for any particular use or in any specific application or arising from

any course of dealing or usage of trade. The user is solely responsible for determining the suitability of the product(s) featured herein for user’s intended purpose and

in user’s specific application. C&D Technologies, Inc. does not warrant or recommend that any of its products be used in any life support or aviation or aerospace

applications.

Power Electronics Division, United States

3400 E Britannia Drive, Tucson, Arizona 85706

Tel: 800.547.2537 Fax: 520.770.9369

C&D Technologies (Power Electronics) Ltd.

Shannon, Co. Clare, Ireland

Tel: +353.61.474.133 Fax:+353.61.474.141

C&D Technologies, (NCL)

Milton Keynes

MK14 5BU UK

Tel: +44 (0)1908 615232 Fax: +44 (0)1908 617545

POWER ELECTRONICS DIVISION

SERIES DC/DC CONVERTER

PRODUCT DATA SHEET

POWER: 0.75 Watt

OUTPUT: Single Output

SIZE: Multiple Package Styles

HPR1XX

HPR1XX

Product Site: www.cdpowerelectronics.com

Corporate Site: www.cdtechno.com