OPA347, 2347, 4347

2

SBOS167D

www.ti.com

PACKAGE

PACKAGE

PRODUCT

PACKAGE/LEAD

DESIGNATOR

MARKING

OPA347NA

SOT23-5

DBV

A47

""""

OPA347PA

DIP-8

P

OPA347PA

OPA347UA

SO-8

D

OPA347UA

""""

OPA347SA

SC-70

DCK

S47

""""

OPA2347EA

SOT23-8

DCN

B47

""""

OPA2347UA

SO-8

D

OPA2347UA

""""

OPA2347YED

WCSP-8

YED

YMD CCS

""""

OPA2347YZDR

Lead-Free WCSP-8

YZD

A9

OPA4347EA

TSSOP-14

PW

OPA4347EA

""""

OPA4347UA

SO-14

D

OPA4347UA

""""

NOTE: (1) For the most current package and ordering information, see the Package Option Addendum at the end of this data sheet, or see the TI web site at www.ti.com.

Supply Voltage, V+ to V– ................................................................... 7.5V

Operating Temperature .................................................. –65

°C to +150°C

Storage Temperature ..................................................... –65

°C to +150°C

Junction Temperature ...................................................................... 150

°C

NOTES: (1) Stresses above these ratings may cause permanent damage.

Exposure to absolute maximum conditions for extended periods may

degrade device reliability. These are stress ratings only. Functional opera-

tion of the device at these conditions, or beyond the specified operating

conditions, is not implied. (2) Input terminals are diode-clamped to the

power-supply rails. Input signals that can swing more than 0.5V beyond the

supply rails should be current-limited to 10mA or less. (3) Short-circuit to

ground, one amplifier per package.

ELECTROSTATIC

DISCHARGE SENSITIVITY

This integrated circuit can be damaged by ESD. Texas

Instruments recommends that all integrated circuits be handled

with appropriate precautions. Failure to observe proper

handling and installation procedures can cause damage.

ESD damage can range from subtle performance degrada-

tion to complete device failure. Precision integrated circuits

may be more susceptible to damage because very small

parametric changes could cause the device not to meet its

published specifications.