ATF1502AS datasheet(13/18 Pages) ATMEL

13 / 18 page

ATF1502AS

PCI Compliance

The ATF1502AS also supports the growing need in the

industry to support the new Peripheral Component Inter-

connect (PCI) interface standard in PCI-based designs and

specifications. The PCI interface calls for high current driv-

ers which are much larger than the traditional TTL drivers.

In general, PLDs and FPGAs parallel outputs to support the

high current load required by the PCI interface. The

ATF1502AS allows this without contributing to system

noise while delivering low output to output skew. Having a

programmable high drive option is also possible without

increasing output delay or pin capacitance. The PCI electri-

cal characteristics appear on the next page.

PCI Voltage-to-Current Curves for +5V Signaling in Pull-Up Mode

PCI Voltage-to-Current Curves for +5V Signaling in Pull-Down Mode

2.4

VCC

1.4

-2

-44

-178

Current (mA)

AC drive

point

drive point

Pull Up

Test Point

2.2

VCC

0.55

3.6

380

Current (mA)

AC drive

point

drive point

Pull Down

Test Point

ATF1502AS Folha de dados(PDF) 13 Page - ATMEL Corporation