108-2072

Rev E

2 of 11

3.

REQUIREMENTS

3.1.

Design and Construction

Product shall be of the design, construction and physical dimensions specified on the applicable

product drawing.

3.2.

Materials

Materials used in the construction of this product shall be as specified on the applicable product

drawing.

3.3.

Ratings

●

Operating Voltage:

50 volts AC peak or DC

●

Current: 1 ampere at <30°C (single circuit, free air)

●

Temperature:

-55 to 105°C

3.4.

Performance and Test Description

Product is designed to meet the electrical, mechanical and environmental performance requirements

specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental

conditions.

3.5.

Test Requirements and Procedures Summary

Test Description

Requirement

Procedure

Initial examination of product.

Meets requirements of product

drawing.

EIA-364-18.

Visual and dimensional (C of C)

inspection per product drawing.

Final examination of product.

Meets visual requirements.

EIA-364-18.

Visual inspection.

ELECTRICAL

Low level contact resistance, circuit. 80 milliohms maximum initial.

5 milliohms maximum average

increase.

10 milliohms maximum individual

increase.

EIA-364-23.

Subject specimens to 100

milliamperes maximum and 20

millivolts maximum open circuit

voltage.

See Figure 3.

Low level contact resistance,

compliant pin.

1 milliohm maximum initial.

1 milliohm maximum change.

EIA-364-23.

Subject specimens to 100

milliamperes maximum and 20

millivolts maximum open circuit

voltage.

See Figure 4.

Insulation resistance.

1000 megohms minimum.

EIA-364-21.

Test between any adjacent pair of

signal contacts, or from any signal

contact to an adjacent ground pin

of mated specimens at 100 volts

DC.

Figure 1 (continued)