| Os motores de busca de Datasheet de Componentes eletrônicos |
|
USB3813 Folha de dados(PDF) 63 Page - SMSC Corporation |
|
|
|||||||||||||||||||||||||||||
USB3813 Folha de dados(HTML) 63 Page - SMSC Corporation |
|
63 / 68 page ![]() USB 2.0 Hi-Speed 3-Port Hub Controller Optimized for Portable Applications Datasheet SMSC USB3813 63 Revision 1.0 (06-17-13) DATASHEET 9.5.2 Reset and Configuration Strap Timing Figure 9.3 illustrates the RESET_N timing requirements and its relation to the configuration strap signals. Assertion of RESET_N is not a requirement. However, if used, it must be asserted for the minimum period specified. Refer to Section 8.3, "Resets," on page 53 for additional information on resets. Refer to Section 6.3, "Device Configuration Straps," on page 27 for additional information on configuration straps. 9.5.3 USB Timing All device USB signals conform to the voltage, power, and timing characteristics/specifications as set forth in the Universal Serial Bus Specification. Please refer to the Universal Serial Bus Specification, Revision 2.0, available at http://www.usb.org. 9.5.4 HSIC Timing All device HSIC signals conform to the voltage, power, and timing characteristics/specifications as set forth in the High-Speed Inter-Chip USB Electrical Specification. Please refer to the High-Speed Inter- Chip USB Electrical Specification, Version 1.0, available at http://www.usb.org. 9.5.5 SMBus Timing All device SMBus signals conform to the voltage, power, and timing characteristics/specifications as set forth in the System Management Bus Specification. Please refer to the System Management Bus Specification, Version 1.0, available at http://smbus.org/specs. 9.5.6 I2C Timing All device I2C signals conform to the 100KHz Standard Mode (Sm) voltage, power, and timing characteristics/specifications as set forth in the I2C-Bus Specification. Please refer to the I2C-Bus Specification, available at http://www.nxp.com. Figure 9.3 RESET_N Configuration Strap Timing Table 9.6 RESET_N Configuration Strap Timing SYMBOL DESCRIPTION MIN TYP MAX UNITS trstia RESET_N input assertion time 5 us tcsh Configuration strap hold after RESET_N deassertion 1 ms RESET_N Configuration Straps trstia tcsh |
|
Ligação URL |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |