STM8AF5189 datasheet(56/110 Pages) STMICROELECTRONICS

56 / 110 page

Electrical characteristics

STM8AF52/62xx, STM8AF51/61xx

56/110

Doc ID 14395 Rev 9

Electrical characteristics

10.1

Parameter conditions

Unless otherwise specified, all voltages are referred to VSS.

10.1.1

Minimum and maximum values

Unless otherwise specified the minimum and maximum values are guaranteed in the worst

conditions of ambient temperature, supply voltage and frequencies by tests in production on

100% of the devices with an ambient temperature at TA = -40 °C, TA = 25 °C, and

TA = TAmax (given by the selected temperature range).

Data based on characterization results, design simulation and/or technology characteristics

are indicated in the table footnotes and are not tested in production.

10.1.2

Typical values

Unless otherwise specified, typical data are based on TA = 25 °C, VDD = 5.0 V. They are

given only as design guidelines and are not tested.

Typical ADC accuracy values are determined by characterization of a batch of samples from

a standard diffusion lot over the full temperature range.

10.1.3

Typical curves

Unless otherwise specified, all typical curves are given only as design guidelines and are

not tested.

10.1.4

Loading capacitor

The loading conditions used for pin parameter measurement are shown in Figure 8.

Figure 8.

Pin loading conditions

50 pF

STM8A pin

STM8AF5189 Folha de dados(PDF) 56 Page - STMicroelectronics