L6482 datasheet(64/73 Pages) STMICROELECTRONICS

64 / 73 page

Programming manual

L6482

64/73

Doc ID 023768 Rev 2

command argument and can by changed by a new StepClock command without exiting

Step-clock mode.

Events that cause bridges to be forced into high impedance state (overtemperature,

overcurrent, etc.) do not cause the device to leave Step-clock mode.

The StepClock command does not force the BUSY flag low. This command can only be

given when the motor is stopped. If a motion is in progress, the motor should be stopped

and it is then possible to send a StepClock command.

Any attempt to perform a StepClock command when the motor is running causes the

command to be ignored and the NOTPERF_CMD flag to rise (Section 9.1.21).

9.2.7

Move (DIR, N_STEP)

The move command produces a motion of N_STEP microsteps; the direction is selected by

the DIR bit ('1' forward or '0' reverse).

The N_STEP value is always in agreement with the selected step mode; the parameter

value unit is equal to the selected step mode (full, half, quarter, etc.).

This command keeps the BUSY flag low until the target number of steps is performed. This

command can only be performed when the motor is stopped. If a motion is in progress the

motor must be stopped and it is then possible to perform a move command.

Any attempt to perform a move command when the motor is running causes the command

to be ignored and the NOTPERF_CMD flag to rise (Section 9.1.21).

9.2.8

GoTo (ABS_POS)

The GoTo command produces a motion to the ABS_POS absolute position through the

shortest path. The ABS_POS value is always in agreement with the selected step mode; the

parameter value unit is equal to the selected step mode (full, half, quarter, etc.).

The GoTo command keeps the BUSY flag low until the target position is reached.

Table 53.

Move command structure

Bit 7

Bit 6

Bit 5

Bit 4

Bit 3

Bit 2

Bit 1

Bit 0

DIR

from host

N_STEP (Byte 2)

from host

N_STEP (Byte 1)

from host

N_STEP (Byte 0)

from host

Table 54.

GoTo command structure

Bit 7

Bit 6

Bit 5

Bit 4

Bit 3

Bit 2

Bit 1

Bit 0

from host

ABS_POS (Byte 2)

from host

ABS_POS (Byte 1)

from host

ABS_POS (Byte 0)

from host

L6482 Folha de dados(PDF) 64 Page - STMicroelectronics

L6482 Folha de dados(HTML) 64 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73

Folha de dados Download

Ligação URL