DBMM25SW datasheet(90/301 Pages) ITT

90 / 301 page

Dimensions are shown in mm (inch)

Dimensions subject to change

D Subminiature

Combo D

Coaxial Assembly Instructions

RG Cable Number

Straight Coaxial

° Coaxial

± 0,25 (.010)

196/U, 178B/U, 187/U,

188/U, 179B/U, 316B/U

7,92 (.312)

6,35 (.250)

1,98 (.078)

9,52 (.375)

5,94 (.234)

1,57 (.062)

195/U, 180B/U,

58/U, 58B/U

9,52 (.375)

7,92 (.312)

1,98 (.078)

10,69 (.422)

7,92 (.312)

2,39 (.094)

Coaxial Cable Trim Dimensions

RG Cable Number

Tool Part Number

Description

Closure

196/U, 178B/U

070051-0000

CCT-DM

187/U, 179B/U,

188/U, 316B/U

070051-0000

CCT-DM

195/U, 180B/U,

58/U, 58B/U

070051-0000

CCT-DM

Crimp Tooling

Straight and 90

° Coaxial Assembly

STEP 1:

Slide the outer ring over the cable jacket. Trim the

cable as specified in the table of Coaxial Cable Trim

Dimensions (see this page). Insert the cable

dielectric and center conductor into the inside

diameter of the inner sleeve. Then solder the center

conductor to the coaxial center contact.

Straight and 90

° Coaxial Assembly

STEP 2:

Slide the outer ring forward until it is flush with the

coaxial shell containing the braid between the outer

ring and the inner sleeve. For solder type coaxes,

soft solder the outer ring to the assembly through

the cross-drilled solder hold. For crimp type

coaxes, crimp with the appropriate tool in the area

defined.

Straight Coaxial

° Coaxial

Straight Coaxial

° Coaxial

Hand tool with integral die set for all coaxial straight

crimp braid.

DBMM25SW Folha de dados(PDF) 90 Page - ITT Industries

DBMM25SW Folha de dados(HTML) 90 Page - ITT Industries

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Folha de dados Download

Ligação URL