www.ti.com

About This Guide

About This Guide

This reference guide for the Tag-it HF-I Pro Transponder IC is designed for use by TI partners who are

engineers experienced with Radio Frequency Identification Devices (RFID) and the processing of wafers.

Regulatory, safety and warranty notices that must be followed are given in Chapter 4.

Conventions

WARNING

A WARNING IS USED WHERE CARE MUST BE TAKEN, OR A

CERTAIN PROCEDURE MUST BE FOLLOWED, IN ORDER TO

PREVENT INJURY OR HARM TO YOUR HEALTH.

CAUTION

This indicates information on conditions that must be met, or a procedure that

must be followed, which, if not heeded, could cause permanent damage to the

equipment or software.

Note:

Indicates conditions that must be met, or procedures that must be followed, to ensure proper

functioning of the equipment or software.

Note:

Information: Indicates information that makes usage of the equipment or software easier.

If You Need Assistance

For more information, please contact the sales office or distributor nearest you. This contact information

can be found on our web site at: http://www.ti-rfid.com.

6

SCBU045 (11-09-21-065) – October 2007

Submit Documentation Feedback