MB-0221-1

2/5

JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd.

Materials and Finishes

Ordering Information

Copper alloy / Sn plating

Contact-L

Copper alloy / Sn plating

Contact-R

White LCP

Insulator

Material / Finish

Component

ES3 B 002 W F 1 R****

Series

No. of Contacts

Modification Code

Reel Product (Note1)

Connection Area Plating

F: Sn plating

Features

No. of Contacts: 2 pos.

Contact Resistance: 60mΩ max. (initial)

Dielectric Withstanding Voltage: AC 500Vr.m.s (per minute)

Durability: 20 mating cycles

Board Insertion Force: 30N max.

Rated Current: 1A

Rated Voltage: AC, DC 200V

Insulation Resistance: 10MΩ min. (after test)

Operating Temperature: -40 to+105 Deg. C

Low-profile 1.6mm mounting height, designed with consideration for light shielding.

Insulator is made of white LCP for heat and light resistance.

Direct connection of converter board and LED mounting board allows for reduced

assembly work time.

Cable-less connection makes reduction in the number of parts possible.

SMT type, can be mounted at the same time as other components to the LED

mounting board.

General Specifications

Connection

B: Bottom Mount Type

Connection to Board

W: SMT straight type, without hold-down