EPC701 datasheet(8/11 Pages) EPC

8 / 11 page

epc701/epc703

The delay time is set with d1, d2, and d3. The bits D1, D2, and D3 are the inverted values of d1, d2, and d3. Table 3 shows the value mapping

table for the 8 different delay times.

delay [µs]

Comments

Default value

100

200

500

1000

Table 3: Delay-time programming table

An un-configured chip is applying a default delay time of 50µs corresponding to [d 1, d2, d3] = 000 and [D1, D2, D3] = 111.

The recovery time is set to o1, o2, and o3, resp. O1, O2, and O3 which are the inverted values of o 1, o2, and o3. Table 4 shows the value mapping

table for the 8 different recovery time delay values.

Recovery

time [ms]

Comments

500

Default value

100

200

1000

1500

Table 4: Recovery time programming table

An un-configured chip is applying the default recovery time of 500ms corresponding to [o 1, o2, o3] = 000 and [O1, O2, O3] = 111.

Programming Example

An example for changing the delay time to 100µs is shown in the following diagram:

Figure 9: Programming example to set tdel to 100μs

Characteristics subject to change without notice

Datasheet epc701_703 - V2.2

www.espros.ch

<Title>

<name>

File:

This document is confidential and protected by law and international trades. It must not be shown to any third party nor be copied in any form without our written permission

02.08.2010

Page 1

<xx>

Clock

Data

Manchester

Code

0 1

Bit #

9 10 11 12 13 14 15 16 17 18 19 20

EPC701 Folha de dados(PDF) 8 Page - Espros Photonics corp

EPC701 Folha de dados(HTML) 8 Page - Espros Photonics corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11

Folha de dados Download

Ligação URL