LCS700-708 datasheet(8/26 Pages) POWERINT

Nome de Peças	LCS700-708

Descrição Electrónicos	Integrated LLC Controller, High-Voltage Power MOSFETs and Drivers

PDF	26 Pages

Scroll/Zoom	100%

Fabricante Electrônico	POWERINT [Power Integrations, Inc.]

Página de início	http://www.powerint.com

Logo

8 / 26 page

Rev. B 062011

LCS700-708

www.powerint.com

Figure 8.

Placement of VCCH Capacitor.

Figure 7.

Preferred Routing of Optocoupler and Traces to FEEDBACK Pin.

Small Signal Bypass Capacitors

Please refer to Figure 5 Note the location of the small signal

bypass capacitors (highlighted) for the FEEDBACK, DT/BF, IS,

VREF, OV/UV and VCC pins, which allow short traces to their

pin connections and to the GROUND pin. Note that there is no

connection between the GROUND pin and the SOURCE pin or

the B- bus on the printed circuit board.

VCCH Bypass Capacitor

Please refer to Figure 8. Note the location of the VCCH

capacitor (highlighted) which allows short connections to the

HB pin and the VCCH pin.

Drain to Source High-Voltage Bypass Capacitor

Please refer to Figure 9. Note the location of the B+ to B- high-

voltage bypass capacitors (highlighted) placed at the IC, minimizing

the PCB trace length to the D and S pins.

LCS700-708 Folha de dados(PDF) 8 Page - Power Integrations, Inc.