For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343

Fax: 978-250-3373

Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

7

7 - 15

Evaluation PCB

The circuit board used in the application should use

RF circuit design techniques. Signal lines should

have 50 Ohm impedance while the package ground

leads should be connected directly to the ground

plane similar to that shown above. A sufficient

number of via holes should be used to connect

the top and bottom ground planes. The evaluation

circuit board shown is available from Hittite upon

request.

Item

Description

J1, J2

PCB Mount SMA Connector

J3, J4

DC Pin

U1

HMC286 / HMC286E Amplifier

103741 Evaluation PCB

[1] Reference this number when ordering complete evaluation PCB

[2] Circuit Board Material: Roger 4350

HMC286 / 286E

v03.0410

GaAs MMIC LOW NOISE

AMPLIFIER, 2.3 - 2.5 GHz