LPC2926 datasheet(13/95 Pages) NXP

Nome de Peças	LPC2926

Descrição Electrónicos	ARM9 microcontroller with CAN, LIN, and USB

PDF	95 Pages

Scroll/Zoom	100%

Fabricante Electrônico	NXP [NXP Semiconductors]

Página de início	http://www.nxp.com

Logo

13 / 95 page

LPC2926_27_29

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 5 — 28 September 2010

13 of 95

NXP Semiconductors

LPC2926/2927/2929

ARM9 microcontroller with CAN, LIN, and USB

6.3 On-chip flash memory system

The LPC2926/2927/2929 includes a 256 kB, 512 kB or 768 kB flash memory system. This

memory can be used for both code and data storage. Programming of the flash memory

can be accomplished via the flash memory controller or the JTAG.

The flash controller also supports a 16 kB, byte-accessible on-chip EEPROM integrated

on the LPC2926/2927/2929.

6.4 On-chip static RAM

In addition to the two 32 kB TCMs the LPC2926/2927/2929 includes two static RAM

memories: one of 32 kB and one of 16 kB. Both may be used for code and/or data

storage.

In addition, 8 kB SRAM for the ETB can be used as static memory for code and data

storage. However, DMA access to this memory region is not supported.

LPC2926 Folha de dados(PDF) 13 Page - NXP Semiconductors