Copyright © 2011 Future Technology Devices International Limited

2

Document Reference No.: FT_000401

USB 2.0 HI-SPEED TO MPSSE CABLE Datasheet

Version 1.0

Clearance No.: FTDI# 214

The following Table 1.1 gives details of the available C232HM MPSSE cables.

Part Number

Description

End Connector

Cable details

C232HM-DDHSL-0

USB to MPSSE cable with +3.3V

digital level signals. Maximum

output of 200mA @ 3.3VDC on

VCC

(see Note 1)

Single pole,

receptacle x 10

10 core, UL2464 24 AWG,

diam=6.5mm

C232HM-EDHSL-0

USB to MPSSE cable with +3.3V

digital level signals. Maximum

output of 200mA @ 5.0VDC on

VCC

(see Note 2)

Single pole,

receptacle x 10

10 core, UL2464 24 AWG,

diam=6.5mm

Table 1.1 C232HM MPSSE Cable Descriptions and Part Numbers

Note 1: The VCC power output signal (RED wire) is 3.3V. The source of 3.3V is the onboard regulator output, which

is switched onto the power output signal.

Note 2: The VCC power output signal (RED wire) is 5.0V. The source of 5.0V is the USB VBUS input, which is

switched onto the power output signal.

FTDI supports customised end connector designs. For more information, please contact your local FTDI

sales office (see end of datasheet for contact details).

The FTDI C232HM MPSSE cables are fully RoHS, FCC and CE compliant.