HCS500 datasheet(9/40 Pages) MICROCHIP

9 / 40 page

DS40153D-page 9

HCS500

4.2

Command Mode

4.2.1

MICROCONTROLLER COMMAND

MODE ACTIVATION

The microcontroller command consists of four parts.

The first part activates the Command mode, the sec-

ond part is the actual command, the third is the address

accessed, and the last part is the data. The microcon-

troller starts the command by taking the clock line high

for up to 500 ms. The decoder acknowledges the start-

up sequence by taking the data line high. The micro-

controller takes the clock line low, after which the

decoder will take the data line low, tri-state the data line

and wait for the command to be clock in. The data must

be set up on the rising edge and will be sampled on the

falling edge of the clock line.

4.2.2

COLLISION DETECTION

The HCS500 uses collision detection to prevent

clashes between the decoder and microcontroller.

Whenever the decoder receives a valid transmission

the following sequence is followed:

• The decoder first checks to see if the clock line is

high. If the clock line is high, the valid transmis-

sion notification is aborted, and the microcon-

troller Command mode request is serviced.

• The decoder takes the data line high and checks

that the clock line doesn’t go high within 50

μs. If

the clock line goes high, the valid transmission

notification is aborted and the Command mode

request is serviced.

• If the clock line goes high after 50

μs but before

500 ms, the decoder will acknowledge by taking

the data line low.

• The microcontroller can then start to clock out the

80-bit data stream of the received transmission.

FIGURE 4-3:

MICROCONTROLLER COMMAND MODE ACTIVATION

MSB

Command Byte

Start Command

TCLKL

TCLKH

TDS

LSB

TSTART

TCMD

TDATA

Address Byte

Data Byte

TADDR

TREQ

TRESP

CLK

μC Data

Decoder

Data

MSB

LSB

MSB

LSB

TACK

HCS500 Folha de dados(PDF) 9 Page - Microchip Technology

HCS500 Folha de dados(HTML) 9 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

Folha de dados Download

Ligação URL