| Os motores de busca de Datasheet de Componentes eletrônicos |
|
MPC8544E Folha de dados(PDF) 96 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
MPC8544E Folha de dados(HTML) 96 Page - Freescale Semiconductor, Inc |
|
96 / 117 page ![]() MPC8544E PowerQUICC III Integrated Processor Hardware Specifications, Rev. 5 96 Freescale Semiconductor Thermal 19.6.2 Platform to FIFO Restrictions Please note the following FIFO maximum speed restrictions based on platform speed. Refer to Section 4.4, “Platform to FIFO Restrictions,” for additional information. 20 Thermal This section describes the thermal specifications of the MPC8544E. 20.1 Thermal Characteristics Table 70 provides the package thermal characteristics. Table 69. FIFO Maximum Speed Restrictions Platform Speed (MHz) Maximum FIFO Speed for Reference Clocks TSECn_TX_CLK, TSECn_RX_CLK (MHz)1 533 126 400 94 Note: 1. FIFO speed should be less than 24% of the platform speed. Table 70. Package Thermal Characteristics Characteristic JEDEC Board Symbol Value Unit Notes Junction-to-ambient natural convection Single layer board (1s) RθJA 26 °C/W 1, 2 Junction-to-ambient natural convection Four layer board (2s2p) RθJA 21 °C/W 1, 2 Junction-to-ambient (@200 ft/min) Single layer board (1s) RθJA 21 °C/W 1, 2 Junction-to-ambient (@200 ft/min) Four layer board (2s2p) RθJA 17 °C/W 1, 2 Junction-to-board thermal — RθJB 12 °C/W 3 Junction-to-case thermal — RθJC <0.1 °C/W 4 Notes: 1. Junction temperature is a function of die size, on-chip power dissipation, package thermal resistance, mounting site (board) temperature, ambient temperature, airflow, power dissipation of other components on the board, and board thermal resistance. 2. Per JEDEC JESD51-2 and JESD51-6 with the board (JESD51-9) horizontal. 3. Thermal resistance between the die and the printed-circuit board per JEDEC JESD51-8. Board temperature is measured on the top surface of the board near the package. 4. Thermal resistance between the active surface of the die and the case top surface determined by the cold plate method (MIL SPEC-883 Method 1012.1) with the calculated case temperature. Actual thermal resistance is less than 0.1 °C/W. |
|
Ligação URL |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |