STCL1100 STCL1120 STCL1160

Maximum rating

Doc ID 13337 Rev 5

9/18

5

Maximum rating

Stressing the device above the rating listed in the Table 1: Absolute maximum ratings may

cause permanent damage to the device. These are stress ratings only and operation of the

device at these or any other conditions above those indicated in the Operating sections of

this specification is not implied. Exposure to absolute maximum rating conditions for

extended periods may affect device reliability. Refer also to the STMicroelectronics SURE

Program and other relevant quality documents.

Table 1.

Absolute maximum ratings

Symbol

Parameter

Note

Value

Unit

–55 to 150

°C

Lead solder temperature for 10

seconds

1.

Reflow at peak temperature of 260 °C (total thermal budget not to exceed 245 °C for more than 30 seconds).

260

°C

Input or output voltage

V

Supply voltage

–0.3 to 7

V