MCP6071_10 datasheet(13/40 Pages) MICROCHIP

13 / 40 page

DS22142B-page 13

MCP6071/2/4

3.0

PIN DESCRIPTIONS

Descriptions of the pins are listed in Table 3-1.

TABLE 3-1:

PIN FUNCTION TABLE

3.1

Analog Outputs

The output pins are low-impedance voltage sources.

3.2

Analog Inputs

The non-inverting and inverting inputs are high-

impedance CMOS inputs with low bias currents.

3.3

Power Supply Pins

The positive power supply (VDD) is 1.8V to 6.0V higher

than the negative power supply (VSS). For normal

operation, the other pins are at voltages between VSS

and VDD.

Typically, these parts are used in a single (positive)

supply configuration. In this case, VSS is connected to

ground and VDD is connected to the supply. VDD will

need bypass capacitors.

3.4

Exposed Thermal Pad (EP)

There is an internal electrical connection between the

Exposed Thermal Pad (EP) and the VSS pin; they must

be connected to the same potential on the Printed

Circuit Board (PCB).

MCP6071

MCP6072

MCP6074

Symbol

Description

SOIC

SOT-23-5 2x3 TDFN

SOIC

2x3 TDFN

SOIC,

TSSOP

611

VOUT, VOUTA Analog Output (op amp A)

222

VIN–, VINA–

Inverting Input (op amp A)

333

VIN+, VINA+

Non-inverting Input (op amp A)

788

VDD

Positive Power Supply

——

—

VINB+

Non-inverting Input (op amp B)

——

—

VINB–

Inverting Input (op amp B)

——

—

VOUTB

Analog Output (op amp B)

——

—

VOUTC

Analog Output (op amp C)

——

—

VINC–

Inverting Input (op amp C)

——

—

VINC+

Non-inverting Input (op amp C)

444

VSS

Negative Power Supply

——

—

VIND+

Non-inverting Input (op amp D)

——

—

VIND–

Inverting Input (op amp D)

——

—

VOUTD

Analog Output (op amp D)

1, 5, 8

—

1, 5, 8

—

No Internal Connection

—

Exposed Thermal Pad (EP); must

be connected to VSS.

MCP6071 Folha de dados(PDF) 13 Page - Microchip Technology

MCP6071 Folha de dados(HTML) 13 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

Folha de dados Download

Ligação URL