32

Snap Action Switch

D2F

Specifications

■ Characteristics

Note: 1. Data shown are of initial value.

2. The dielectric strength shown in the table indicates a value for models with a separator.

3. For pin plunger models, the values are measured at the free position and total travel position. For the lever models, they are measured

at the total travel position.

■ Ratings

Note: 1. When using an inductive load or motor load, consult OMRON.

■ Approvals

UL Recognized, CSA Certified

Note: The rated values approved by each of the safety standards

(e.g.UL,CSA) may be different from the performance

character-

istics individually defined in this catalog.

■ Contact Specifications

Note: Minimum applicable loads are indicated by N standard

reference values. This value represents the failure rate at a

60% (

λ

The equation

λ

rate of 1/2,000,000 operations can be expected at a reliability

level of 60%.

Operating speed

1 to 500 mm/second (pin plunger models)

Operating frequency

Mechanical: 200 operations per minute max.

Electrical: 30 operations per minute max.

Contact resistance

General Purpose: 30 m

Ω max. (Standard force versions)

50 m

Ω max. (Low force versions)

Microload:

100 m

Ω max.

Insulation resistance

100 M

Ω min. at 500 VDC

Dielectric strength (See note 2)

600 VAC, 50/60 Hz for 1 minute between terminals of same polarity

1,500 VAC, 50/60 Hz for 1 minute between current-carrying metal parts and ground, and between each

terminal and non-current-carrying metal parts

Vibration resistance (See note 3)

Malfunction: 10 to 55 Hz, 1.5 mm double amplitude

Shock resistance (See note 3)

Degree of protection

IEC IP40

Degree of protection against

electric shock

Class I

Proof tracking index (PTI)

175

Ambient operating temperature

-25

° to 65°C (at 60% RH) with no icing

Ambient operating Humidity

85% max. (for 5

° to 35°C)

Service life

(Consult Omron for test conditions)

Mechanical: 1 million operations min. at 60 operations/minute.

Electrical: 30,000 operations min. at 30 operations/minute.

Weight

Approx. 0.5 g (pin plunger models)

Rated Voltage

Resistive load

Microvoltage/current (D2F-01 models)

General-purpose (D2F models)

Low force

Standard

Low force

Standard

125 VAC

——1 A

3 A

30 VDC

0.1 A

0.1 A

0.5 A

2 A

Rated voltage

D2F

D2F-01

Standard

Force

Low Force

125 VAC

3 A

1A

- - -

30 VDC

2 A

0.5 A

0.1 A

Item

D2F

D2F-01

Specification

Crossbar

Material

Silver alloy

Gold alloy

Gap

(Standard value)

0.25 mm

Minimum Applicable Load

(See note)

100 mA at 5 VDC 1 mA at 5VDC