GaAs SPDT Switch

DC - 6.0 GHz

Rev. V6

MASW6010G

2

•

North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

•

India Tel: +91.80.43537383

•

China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Parameter

Test Conditions

Units

Min.

Typ.

Max.

Insertion Loss

DC - 1.0 GHz

DC - 2.0 GHz

DC - 6.0 GHz

dB

—

—

—

—

—

—

0.6

0.8

1.4

Isolation

DC - 1.0 GHz

DC - 2.0 GHz

DC - 6.0 GHz

dB

45

38

22

—

—

—

—

—

—

VSWR

DC - 1.0 GHz

DC - 2.0 GHz

DC - 6.0 GHz

Ratio

—

—

—

—

—

—

1.1:1

1.2:1

1.9:1

Trise, Tfall

10% to 90% RF and 90% to 10% RF

ns

—

2

—

Ton, Toff

50% control to 90% RF, and 50% control to

10% RF

ns

—

4

—

Transients

In-Band

mV

—

10

—

Input P1dB

Above 500 MHz, 0 to -5 V

100 MHz, 0 to -5 V

Above 500 MHz, 0 to -8 V

100 MHz, 0 to -8 V

dBm

—

—

—

—

+27

+21

+33

+26

—

—

—

—

IP2

Two Tone, +5 dBm/Tone, 5 MHz Spacing

Above 500 MHz

100 MHz

dBm

—

—

+68

+62

—

—

IIP3

Two Tone, +5 dBm/Tone, 5 MHz Spacing

Above 500 MHz

100 MHz

dBm

—

—

+46

+40

—

—

Control Voltage

(Complementary Logic)

µA

—

—

—

—

—

—

20

50

300

3. All specifications apply with 50-ohm impedance connected to all RF ports, 0 and –8 VDC control voltages.

4. Loss changes 0.0025 dB/°C (From –55°C to +85°C).

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

Gallium Arsenide Integrated Circuits are sensitive

to electrostatic discharge (ESD) and can be

damaged by static electricity. Proper ESD control

techniques should be used when handling these

devices.

Control Inputs

Condition of Switch

RF Common to each RF Port

A

B

RF1

RF2

On

Off

Off

On