• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

3

Low Cost MMIC Mixer

1400 - 2100 MHz

Rev. V2

MAMXSS0013

ADVANCED:

Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY:

Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

The PCB dielectric between RF traces and RF ground layers

should be chosen to reduce RF discontinuities between 50 Ω

lines and package pins.

M/A-COM recommends an

FR-4 dielectric thickness of 0.008” (0.2 mm) yielding a 50 Ω

line width of 0.015” (0.38). The recommended metalization is 1

ounce copper.

Recommended PCB Configuration

Layout View

Lead-Free SOT-25

†

Cross Section View

†

Reference Application Note M538 for lead-free solder reflow recommendations.

Meets JEDEC moisture sensitivity level 1 requirements.