Page 4

HPR10XX

REV D

8/2007

The information provided herein is believed to be reliable; however, C&D TECHNOLOGIES assumes no responsibility for inaccuracies or omissions. C&D TECHNOLOGIES assumes no responsibility for the use of

this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein

are implied or granted to any third party. C&D TECHNOLOGIES does not authorize or warrant any C&D TECHNOLOGIES product for use in life support devices/systems or in aircraft control applications.

ORDERING INFORMATION

Device Family

HPR Indicates DC/DC Converter

Model Number

Selected from Table of Electrical Characteristics

Screening Option

HPR 10XX /H

ABSOLUTE MAXIMUM RATINGS

Internal Power Dissipation.....................................................490mW

Short Circuit Duration......................................................Momentary

Lead Temperature (soldering, 10 seconds max)..................+300°C

These devices are intended for wave soldering or manual soldering.

They are not intended to be subject to surface mount processes under any circumstances.

The normal wave soldering process can be used with these devices where the device is subjected to a maximum wave temperature of 260°C for a period of

no more than 10 seconds. Within this time and temperature range, the integrity of the device’s body will not be compromised and internal temperatures within

the converter will not exceed 175°C. Care should be taken to control manual soldering limits identical to that of wave soldering.

THROUGH-HOLE SOLDERING INFORMATION