TDA7405 datasheet(37/56 Pages) STMICROELECTRONICS

37 / 56 page

37/56

TDA7405

5.6 Dual-MPX Mode

The TDA7405 is able to support a twin tuner concept via the Dual-MPX-Mode. In this configuration the MPX-pin

and the MD2G-pin are acting as MPX1 and MPX2 inputs. The DC-Voltage at the MD2-pin controls whether one

or both MPX-signals are used to decode the stereo FM-signal. It is designed as a window-comparator with the

characteristic shown in Figure 33 (Please note that the thresholds have a hysteresis of 500mV). In this mode

the stereodecoder highohmic-mute mutes both inputs in parallel.

Figure 33. Blockdiagram Dual MPX

Table 6. Pin-Configuration DMPX-/WSM-Mode

5.7 Weak-Signal Mute

For use with front-ends which do not support a weak-signal-mute function the TDA7405 offers this feature as

well. If this mode is enabled the pins 26 and 27 are used as an AC-coupling behind the Mute-Stage (see block-

diagram). In parallel pin 12 (AMIF) is switched internally to realize a mute time-constant with fast attack- and

slow decay-time.

Dual MPX

Weak-Signal

Mute

AMIF(12)

DMPXC(25)

MPX2(26)

MD2(43)

MD2G(44)

off

AMIF-In

not used

MD2-In

MD2-Gnd

off

WSM-TC

WSM-In

WSM-Out

MD2-In

MD2-Gnd

off

AMIF-In

DMPC-Cntrl

MPX2

MD2-In

MD2-Gnd

WSM-TC

WSM-In

WSM-Out

DMPC-Cntrl

MPX2

TDA7405 Folha de dados(PDF) 37 Page - STMicroelectronics

TDA7405 Folha de dados(HTML) 37 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56

Folha de dados Download

Ligação URL