| Os motores de busca de Datasheet de Componentes eletrônicos |
|
H8S/2437 Folha de dados(PDF) 139 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
H8S/2437 Folha de dados(HTML) 139 Page - Renesas Technology Corp |
|
139 / 746 page ![]() Rev. 1.00, 09/03, page 101 of 704 6.4.4 Address Strobe/Hold Signal In normal extended mode, the address above the bus address is enabled, which is indicated by the output strobe signal ( AS). In multiplex extended mode, the hold signal (AH) which indicates the address fetch timing, is output. Output polarity of the AS/ AH signals can be controlled by the PNCASH bit in BCR. 6.4.5 Address Output This LSI can output a maximum of 16 addresses. In normal extended mode, enabling or disabling of A15 to A0 signal output is set by the data direction register (DDR) bit for the port corresponding to the A15 to A0 pins. In external extended mode, the A15 to A0 pins are placed in the input state after a reset, the corresponding DDR bits should be set to 1 when outputting signals A15 to A0. For details, refer to section 7, I/O Ports. In multiplex extended mode, the address output is decided by the access area bus width. If the access area is 16 bits, the lower 16-bit internal addresses are output from A15 to A0 in the address cycle. If the access area is 8 bits, the lower 8-bit internal addresses are output from A15 to A8 in the address cycle. |
|
Ligação URL |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |