Os motores de busca de Datasheet de Componentes eletrônicos
  Portuguese  ▼
ALLDATASHEETPT.COM

X  

H8S/2437 Folha de dados(PDF) 138 Page - Renesas Technology Corp

Nome de Peças H8S/2437
Descrição Electrónicos  16-Bit Single-Chip Microcomputer
PDF  746 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Fabricante Electrônico  RENESAS [Renesas Technology Corp]
Página de início  http://www.renesas.com
Logo RENESAS - Renesas Technology Corp

H8S/2437 Folha de dados(HTML) 138 Page - Renesas Technology Corp

Back Button H8S/2437 Datasheet HTML 134Page - Renesas Technology Corp H8S/2437 Datasheet HTML 135Page - Renesas Technology Corp H8S/2437 Datasheet HTML 136Page - Renesas Technology Corp H8S/2437 Datasheet HTML 137Page - Renesas Technology Corp H8S/2437 Datasheet HTML 138Page - Renesas Technology Corp H8S/2437 Datasheet HTML 139Page - Renesas Technology Corp H8S/2437 Datasheet HTML 140Page - Renesas Technology Corp H8S/2437 Datasheet HTML 141Page - Renesas Technology Corp H8S/2437 Datasheet HTML 142Page - Renesas Technology Corp Next Button
Zoom Inzoom in Zoom Outzoom out
 138 / 746 page
background image
Rev. 1.00, 09/03, page 100 of 704
6.4.2
External Address Area
The initial condition of the external address space is normal extended 3-state access space. The
space outside the on-chip ROM, on-chip RAM, internal I/O register, and their reserved areas are
available as the external address spaces. When the RAME bit in SYSCR is set to 1, the on-chip
RAM and its reserved area are enabled. However if the RAME bit is cleared to 0, the on-chip
RAM and its reserved area are ignored. When the RAME bit is 0, H'FF0000 to H'FF9FFF of the
on-chip RAM and its reserved area, becomes an external address area.
6.4.3
Chip Select Signals
This LSI can output chip select signals (
CS1 to CS3) for areas 0 to 3 respectively. The CS1 to CS3
signal outputs low or high level when the corresponding external space area is accessed. The chip
select signal’s output polarity can be controlled by the PNCCSn bit in BCRAn. Figure 6.2 shows
an example of
CS1 to CS3 signal’s output polarity and output timing.
Selection of
CS1 to CS3 signal output and I/O port input/output is set by the port function control
register (PFCR) bit for the port corresponding to the
CS1 to CS3 pins. In external extended mode,
all of the
CS1 to CS3 pins function as I/O ports after a reset. Therefore the corresponding PFCR
bits should be set to 1 when outputting signals
CS1 to CS3. For details, refer to section 7, I/O
Ports.
Bus cycle
T1
T2
T3
External address of area n
Address bus
(PNCCS = 0)
(PNCCS = 1)
Note: n = 1 to 3
Figure 6.2
CS
CS
CS
CSnnnn Signal Output Polarity and Output Timing



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100  ...More


Folha de dados Download

Go To PDF Page


Ligação URL



ALLDATASHEET é útil para você?  [ DONATE ] 

Sobre Alldatasheet   |   Publicidade   |   Contato conosco   |   Privacy Policy   |   Link para a ficha técnica    |   roca de Link   |   Lista de Fabricantes
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com