Os motores de busca de Datasheet de Componentes eletrônicos
  Portuguese  ▼
ALLDATASHEETPT.COM

X  

H8/300H Folha de dados(PDF) 85 Page - Renesas Technology Corp

Nome de Peças H8/300H
Descrição Electrónicos  Renesas 16-Bit Single-Chip Microcomputer
PDF  552 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Fabricante Electrônico  RENESAS [Renesas Technology Corp]
Página de início  http://www.renesas.com
Logo RENESAS - Renesas Technology Corp

H8/300H Folha de dados(HTML) 85 Page - Renesas Technology Corp

Back Button H8/300H Datasheet HTML 81Page - Renesas Technology Corp H8/300H Datasheet HTML 82Page - Renesas Technology Corp H8/300H Datasheet HTML 83Page - Renesas Technology Corp H8/300H Datasheet HTML 84Page - Renesas Technology Corp H8/300H Datasheet HTML 85Page - Renesas Technology Corp H8/300H Datasheet HTML 86Page - Renesas Technology Corp H8/300H Datasheet HTML 87Page - Renesas Technology Corp H8/300H Datasheet HTML 88Page - Renesas Technology Corp H8/300H Datasheet HTML 89Page - Renesas Technology Corp Next Button
Zoom Inzoom in Zoom Outzoom out
 85 / 552 page
background image
Section 3 Exception Handling
Rev. 3.00 May 15, 2007 Page 53 of 516
REJ09B0152-0300
3.5.2
Internal Interrupts
Internal interrupts generated from the on-chip peripheral modules have the following features:
• For each on-chip peripheral module, there are flags that indicate the interrupt request status,
and enable bits that select enabling or disabling of these interrupts. Internal interrupts can be
controlled independently. If an enable bit is set to 1, an interrupt request is sent to the interrupt
controller.
3.6
Operation
NMI interrupts are accepted at all times except in the reset state. In the case of IRQ interrupts and
on-chip peripheral module interrupts, an enable bit is provided for each interrupt. Clearing an
enable bit to 0 disables the corresponding interrupt request. Interrupt sources for which the enable
bits are set to 1 are controlled by the interrupt controller.
Figure 3.2 shows a block diagram of the interrupt controller. Figure 3.3 shows the flow up to
interrupt acceptance.
Interrupt operation is described as follows.
1. If an interrupt source whose interrupt enable register bit is set to 1 occurs, an interrupt request
is sent to the interrupt controller.
2. When the interrupt controller receives an interrupt request, it sets the interrupt request flag.
3. From among the interrupts with interrupt request flags set to 1, the interrupt controller selects
the interrupt request with the highest priority and holds the others pending (see table 3.1).
4. The interrupt controller checks the I bit of CCR. If the I bit is 0, the selected interrupt request
is accepted; if the I bit is 1, the interrupt request is held pending.
5. If the interrupt request is accepted, after processing of the current instruction is completed,
both PC and CCR are pushed onto the stack. The state of the stack at this time is shown in
figure 3.5. The PC value pushed onto the stack is the address of the first instruction to be
executed upon return from interrupt handling.
6. The I bit of CCR is set to 1, masking further interrupts.
7. The vector address corresponding to the accepted interrupt is generated, and the interrupt
handling routine located at the address indicated by the contents of the vector address is
executed.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100  ...More


Folha de dados Download

Go To PDF Page


Ligação URL



ALLDATASHEET é útil para você?  [ DONATE ] 

Sobre Alldatasheet   |   Publicidade   |   Contato conosco   |   Privacy Policy   |   Link para a ficha técnica    |   roca de Link   |   Lista de Fabricantes
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com