STV0676 datasheet(12/21 Pages) STMICROELECTRONICS

Nome de Peças	STV0676

Descrição Electrónicos	CMOS Digital Camera Co-processor

PDF	21 Pages

Scroll/Zoom	100%

Fabricante Electrônico	STMICROELECTRONICS [STMicroelectronics]

Página de início	http://www.st.com

Logo

12 / 21 page

External interfaces

STV0676

12/21

Revision C

2.4.3

CheckSum

The checksum is calculated by adding the byte value of EEPROM locations 0 to 12 inclusive, the

low order byte of the result is stored in location 13.

2.5

I2C slave mode

STV0676 can be configured to behave as an I2C slave. This allows the device to be configured by

host devices other than PCs. Details of the I2C messages supported and description of the I2C

2.6

Digiport

The Digiport is a 10-bit bi-directional data port which can be used to transfer video data in or out of

the device. This port can also be used to configure USB descriptor information at power up see

(

Section 2.3). Full details on the digiport operation and control are available from

STMicroelectronics.

2.7

General purpose input and output

STV0676 provides up to 8 pins which can be used as general purpose I/O. These pins can be used

to interface to led’s, buzzers, switches etc.

STV0676 Folha de dados(PDF) 12 Page - STMicroelectronics