MSC7119 datasheet(44/60 Pages) FREESCALE

Nome de Peças	MSC7119

Descrição Electrónicos	Low-Cost 16-bit DSP with DDR Controller and 10/100 Mbps Ethernet MAC

PDF	60 Pages

Scroll/Zoom	100%

Fabricante Electrônico	FREESCALE [Freescale Semiconductor, Inc]

Página de início	http://www.freescale.com

Logo

44 / 60 page

MSC7119 Data Sheet, Rev. 8

Hardware Design Considerations

Freescale Semiconductor

3.2.2.2

Case 2

The power-up sequence is as follows:

Turn on the VDDIO (3.3 V) supply first.

Turn on the VDDC (1.2 V) and VDDM (2.5 V) supplies simultaneously (second).

Turn on the VREF (1.25 V) supply last (third).

Note:

Make sure that the time interval between the ramp-up of VDDIO and VDDC/VDDM is less than 10 ms.

The power-down sequence is as follows:

Turn off the VREF (1.25 V) supply first.

Turn off the VDDM (2.5 V) supply second.

Turn off the VDDC (1.2 V) supply third.

Turn of the VDDIO (3.3 V) supply fourth (last).

Use the following guidelines:

•

Make sure that the time interval between the ramp-down for VDDIO and VDDC is less than 10 ms.

•

Make sure that the time interval between the ramp-up or ramp-down for VDDC and VDDM is less than 10 ms for

power-up and power-down.

•

Refer to Figure 31 for relative timing for Case 2.

Figure 31. Voltage Sequencing Case 2

Time

Ramp-down

Ramp-up

VDDIO = 3.3 V

VDDM = 2.5 V

VDDC = 1.2 V

VREF = 1.25 V

<10 ms

MSC7119 Folha de dados(PDF) 44 Page - Freescale Semiconductor, Inc