STLM75DS2F datasheet(7/37 Pages) STMICROELECTRONICS

Nome de Peças	STLM75DS2F

Descrição Electrónicos	Digital temperature sensor and thermal watchdog

PDF	37 Pages

Scroll/Zoom	100%

Fabricante Electrônico	STMICROELECTRONICS [STMicroelectronics]

Página de início	http://www.st.com

Logo

7 / 37 page

STLM75

Description

7/37

1.2

Temperature sensor output

The STLM75 temperature sensor has a dedicated open drain over-limit signal/interrupt

(OS/INT) output which features a thermal alarm function. This function provides a user-

programmable trip and turn-off temperature. It can operate in either of two selectable

modes:

●

Comparator mode, and

●

Interrupt mode.

At power-up the STLM75 immediately begins measuring the temperature and converting the

temperature to a digital value.

The measured temperature value is compared with a temperature limit (which is stored in

the 16-bit (TOS) READ/WRITE register), and the hysteresis temperature (which is stored in

the 16-bit (THYS) READ/WRITE register). If the measured value exceeds these limits, the

OS/INT pin is activated (see Figure 3 on page 8 and Table 2 on page 14).

Note:

See Pin descriptions on page 9 for details.

Figure 1.

Logic diagram

SDA and OS/INT are open drain.

AI11899

SDA(1)

VDD

STLM75

GND

SCL

OS/INT(1)

STLM75DS2F Folha de dados(PDF) 7 Page - STMicroelectronics