TSC101 datasheet(11/17 Pages) STMICROELECTRONICS

11 / 17 page

TSC101

Parameter definitions

11/17

Parameter definitions

Common mode rejection ratio (CMR)

The common-mode rejection ratio (CMR) measures the ability of the current-sensing

amplifier to reject any DC voltage applied on both inputs Vp and Vm. The CMR is referred

back to the input so that its effect can be compared with the applied differential signal. The

CMR is defined by the formula:

Supply voltage rejection ratio (SVR)

The supply-voltage rejection ratio (SVR) measures the ability of the current-sensing

amplifier to reject any variation of the supply voltage VCC. The SVR is referred back to the

input so that its effect can be compared with the applied differential signal. The SVR is

defined by the formula:

Gain (Av) and input offset voltage (Vos)

The input offset voltage is defined as the intersection between the linear regression of the

Vout versus Vsense curve with the X-axis (see Figure 20). If Vout1 is the output voltage with

Vsense=Vsense1=50mV and Vout2 is the output voltage with Vsense=Vsense2=5mV, then Vos

can be calculated with the following formula:

The amplification gain Av is defined as the ratio between output voltage and input differential

voltage:

CMR

–

ΔV

out

ΔV

icm

⋅

------------------------------

log

⋅

SVR

–

ΔV

out

ΔV

⋅

------------------------------

log

⋅

sense1

sense2

–

out1

out2

–

------------------------------------------------

out1

⋅

⎝⎠

⎛⎞

–

out

sense

------------------

TSC101 Folha de dados(PDF) 11 Page - STMicroelectronics

TSC101 Folha de dados(HTML) 11 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Folha de dados Download

Ligação URL