DEVKIT-MPC5744P datasheet(4/24 Pages) NXP

Nome de Peças	DEVKIT-MPC5744P

Descrição Electrónicos	Ultra-Reliable MCUs for Industrial and Automotive Applications

PDF	24 Pages

Scroll/Zoom	100%

Fabricante Electrônico	NXP [NXP Semiconductors]

Página de início	http://www.nxp.com

Logo

4 / 24 page

EXTERNAL USE

Step-by-Step Installation Instructions

Install Software and Tools

Install S32 Design Studio IDE for Power Architecture.

S32 Design Studio for Power

See Software Installation Guide (SWIG) for detailed procedure

Connect the USB Cable

Connect one end of the USB cable to the PC and the other end to

the micro-B connector on the DEVKIT-MPC5744P board. Allow the

PC to automatically configure the USB drivers.

Observe the Default Program reaction

The pre-loaded example project utilizes the DEVKIT-MPC5744P

user potentiometer and the user LEDs. Once the board is plugged

in the ADC will scan the potentiometer result and shine LEDs based

on result. Turn the potentiometer to turn on a different LED pattern.

(Clock is configured to PLL running at 160 MHz)

Learn More About the DEVKIT-MPC5744P

Read release notes and documentation on the

nxp.com/DEVKIT-MPC5744P

nxp.com/MPC5744P

In this quick start guide, you will learn how to set up the

DEVKIT-MPC5744P board and run the default program.

DEVKIT-MPC5744P Folha de dados(PDF) 4 Page - NXP Semiconductors