| Os motores de busca de Datasheet de Componentes eletrônicos |
|
NPM1100-CAAA-R7 Folha de dados(PDF) 22 Page - Nordic Semiconductor |
|
|
|||||||||||||||||||||||||||||
NPM1100-CAAA-R7 Folha de dados(HTML) 22 Page - Nordic Semiconductor |
|
22 / 58 page ![]() Core components • Using a battery pack with an integrated NTC thermistor • Connecting a thermistor between the NTC pin and the AVSS pin The thermistor needs to have thermal contact with the battery and preferably within the battery pack. Recommended values for the NTC thermistor are found in the following table. Parameter Value Unit Nominal resistance at 25°C 10 kΩ Resistance accuracy 1 % B25/50 constant 3380 Kelvin B25/85 constant 3434 to 3435 Kelvin B constant accuracy 1 % Table 12: Recommended NTC thermistor values If the thermal protection feature is not used, then a 10 kΩ, ≤20% accuracy resistor should be connected between NTC and AVSS pins. To provide JEITA compliant thermal protection, the charge current limit and termination voltage are adjusted according to the NTC thermistor measurement. Temperature region Battery temperature Charging current Termination voltage Cold T < 0°C 0 (OFF) NA Cool 0°C < T < 10°C IREDUCED VTERM Nominal 10°C < T < 45°C ICHGLIM VTERM Warm 45°C < T < 60°C ICHGLIM VTERM-VTHIGH_DELTA Hot T > 60°C 0 (OFF) NA Table 13: Battery temperature ranges 6.2.7 Charger thermal regulation If the device junction temperature exceeds THIGH and CHARGER is in Fast Charge mode, the charge current is reduced to IREDUCED. 6.2.8 Charger error conditions A CHARGER error condition occurs when one of the following are present: • A battery short ( VBAT to AVSS) • Battery voltage lower than VBATCHARGEMIN after battery detection due to a fault with the battery • Trickle charge timeout; see TOUTTRICKLE • Constant voltage charge/fast charge timeout; see TOUTCHARGE • Device internal error occurs when CHARGER is self-checking After an error is detected, CHARGER is disabled, the charging error indication is activated, and the charging indication is deactivated. Error conditions are cleared when VBUS is disconnected and reconnected again. Note: The constant voltage/fast charge timeout is the combined time spent in both constant voltage charge and fast charge, TOUTCHARGE. 4445_367 v1.0 22 |
|
Ligação URL |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |