4

Raspberry Pi M.2 HAT+ – Raspberry Pi Ltd

WARNINGS

•

This product shall only be connected to a Raspberry Pi via the PCIe interface.

•

Any external power supply used with the Raspberry Pi M.2 HAT+ shall comply with relevant regulations and standards

applicable in the country of intended use.

•

This product should be operated in a well-ventilated environment, and if used inside a case, the case should not be

covered.

•

Whilst in use, this product should be firmly secured, and should not be contacted by conductive items.

•

The connection of incompatible devices to the Raspberry Pi M.2 HAT+ may affect compliance, result in damage to the

unit, and invalidate the warranty.

•

The connection of incompatible devices to the PCIe interface of a Raspberry Pi computer may affect compliance and

result in damage to the unit and invalidate the warranty.

•

All peripherals used with this product should comply with relevant standards for the country of use and be marked

accordingly to ensure that safety and performance requirements are met.

•

The cables and connectors of all peripherals used with this product must have adequate insulation so that relevant

safety requirements are met.

•

Operation of this device requires adult supervision.

SAFETY INSTRUCTIONS

To avoid malfunction or damage to this product, please observe the following:

•

Do not expose to water or moisture, or place on a conductive surface whilst in operation.

•

Do not expose to heat from any source; Raspberry Pi computers and the Raspberry Pi M.2 HAT+ are designed for

reliable operation at normal ambient temperatures.

•

Take care whilst handling to avoid mechanical or electrical damage to the printed circuit board and connectors.

•

Whilst it is powered, avoid handling the printed circuit board, or only handle it by the corners to minimise the risk of

electrostatic discharge damage.