v32

19

10-Dec-2020

This will work with DAC/DAC PRO/DigiAMP.

Press Save, and you will be prompted to reboot.

Restart Volumio for this change to persist.

Once Volumio has restarted, once again select Menu/Playback options.

Ensure that the Volume Options have the Mixer type as Hardware, and that the Mixer Control Name is set to

“Digital”.

Press SAVE.

MoodeAudio (http://www.moodeaudio.org)

From a fresh distribution you will find that IQaudio support is built in.

connect from web browser to moode.local

select configure from the pull down menu, then system.

Within the Audio section select the IQaudio device you have (such as DAC+) and press SET

Within the same selection make sure you set the volume to around 20% (not 100%) and press SET

Select reboot

Once

reconnected….

Select configure from the pull down menu and then MPD

Within Setting, select volume control - hardware and then APPLY

Select reboot

RuneAudio (http://www.runeaudio.com)

From a fresh distribution you will find that IQaudio DAC+ support is built in.

Write SD card image, boot Pi.

ssh into the Pi as root (password rune) and edit /boot/config.txt to select the IQaudio DAC+ devicetree

overlay. Save and reboot