13

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

FEATURES OF THE MACHINE

1. Power-On LED

When the power is switched on at the back of the machine the switch will be

illuminated, as will the green ‘Power On’ LED.

2. Thermal overload LED

If the duty cycle is exceeded as a result of welding for too long with a high current,

the overload light will illuminate and the welder will turn off. When the welder has

cooled down (approx. 5 to 10 minutes), the power will be restored and welding can

recommence.

3. Digital voltage display meter

• Displays selected output voltage the machine.

4. Welding voltage selector knob

Adjusts the output voltage according to the welding task being performed.

5. Positive Output Terminal

• Connect the electrode holder cable to the positive terminal

6. Negative Output Terminal

• Connect the earth clamp cable to the negative terminal

LOOSE ITEMS SUPPLIED INCLUDE:

7. Welding Mask

• c/w handle, lenses & locking nuts for assembly

8. Welding electrode holder/cable

9. Wire Brush/chipping hammer

10.Earth Cable/clamp