AS1170 datasheet(49/53 Pages) AMSOSRAM

Nome de Peças	AS1170

Descrição Electrónicos	AS1170 High current LED/VCSEL driver

PDF	53 Pages

Scroll/Zoom	100%

Fabricante Electrônico	AMSOSRAM [ams-OSRAM AG]

Página de início	https://ams-osram.com/

Logo

49 / 53 page

AS1170

Application information

Datasheet

• PUBLIC • Document Feedback

DS001083

• v2-00 • 2024-Feb-05

49 / 53

Figure 32: Layout recommendation

(1) If component placement rules allow, move all components close to the AS1170 to reduce the area and length of Loop1 and

Loop2.

An additional 100 nF (e.g. Murata GRM155R61C104, > 50 nF @ 3 V, 0402 size) capacitor

CVIN2 in parallel to CVIN is recommended to filter high frequency noise for the power supply of

AS1170. This capacitor should be as close as possible to the GND/VIN pins of AS1170.

10.3

5 V operating mode

The AS1170 can be used to power a 5 V system (e.g. audio amplifier). The operating mode is

selected by setting register bit const_v_mode=1. In this operating mode, the current sinks are

disabled and cannot be switched on.

Information:

• There is always a diode between V

IN and VOUT1/2 due to the internal circuit.

Therefore VOUT1/2 cannot be completely switched off.

AS1170 Folha de dados(PDF) 49 Page - ams-OSRAM AG