8

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

BEFORE USE

FITTING THE SPARK DEFLECTOR

ASSEMBLY

1. Slide the spark deflector along the

grooves on the sanding arm.

2. Tighten the knurled screw.

ADJUSTMENT

1. When the spark deflector is

mounted it can be adjusted to

one of four positions as required

by the user.

2. Push the spark deflector into the

required position around the

sanding arm.

FITTING AND REMOVING ACCESSORIES

1. Press the spindle lock button.

2. Remove the securing screw with

the hex key provided.

3. Push the sanding accessory onto

the tool holder.

4. Secure by refitting the securing

screw.

WARNING: BEFORE FITTING ACCESSORIES MAKE SURE THAT THE TOOL IS

SWITCHED OFF AND UNPLUGGED.