4

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

UNPACKING

Ensure the press and its components suffered no damage during transit and

that all components are present. Should any loss or damage become

apparent, please contact your CLARKE dealer immediately

INVENTORY

• 1 x Frame

• 2 x Base Supports

• 4 x Stay Bars

• 1 x Ram

• 1 x Ram Baseplate

• 1 x Pump

• 1 x Pump Handle

• 1 x Hose Assembly (attached to frame)

• 1 x Pressure Gauge

• 1 x Press Bed (Frame)

• 2 x Bed Support Pins with 4 x retaining spring clips

• 2 x Bed blocks (V-blocks)

• 1 x Instruction Manual

• 1 x Fixing Kit (containing bolts, flat washer, spring washers & nuts,

compression springs & hydraulic fittings).

TOOLS REQUIRED

• Open spanners (10, 12, 17, 19, 22, 27 & 29 mm) or an adjustable wrench

• PTFE tape

ACCESSORIES

• A mandrel set (including storage bracket and pressure plate) is not supplied

with the press but is available from your dealer as Clarke part no 7615062.